High Grade PC Plastic Fiber Optic Splice Closure Direct-buried
Horizontal Fiber optic splice closure of QYS202 is suitable for
single core and ribbon fiber ,they are installed on wall
,direct-buried ,aerial ,pipelined .
Ø The housing of box is made of high-grade PC plastic, the tray is
made of ABS plastic ,these material to ensure the lifetime.
Ø We use speical rubber to seal the cover ,which not only ensure
the sealing proformance ,but also increases the oxidation
resistance ,it completely reaches the repetition sealing
requirements and realized the repetition use of the products.
Ø The installation accessories provided:sealing tie 2pcs,sealing
tape 1pc,pvc insulation tape 1pc,splice pipe ,nylon tie
4pcs,plastic spanner 1pc,sticker,hanging hook 2pcs,Hex key2pcs
Main technical Indexes:
Ø Seal performance : the pressure in the closure is 100Kpa,put the
closure into the water for 15minutes,there is no air bubble ,and
observed it for 24 hours ,there is no change of air pressure
Ø Re-entry performance:after 3 times of normal operations ,it can
still be up to the seal performance standard
Ø Insulation resisitance: ≥2x104MΩ
Ø Withstand voltage strength :there is no puncture and no arc-cover
after the function of 15KVDC/1min.
|Model||Dimension (MM)||G.W./N.W(kg)||Material||Inlet/Outlet||Diameter of fiber cable||Capacity of FOSC||Dimension /CTN (cm)|
|GJS202||400x180x85||1.7/1.3||PC||2inlets and 2outlets||Φ20mm||Bunchy:12-48(cores)||51*39*41.5|