Horizontal Fiber Optic Splice Closure for for Single Core and
Horizontal Fiber optic splice closure is suitable for single core
and ribbon fiber,
they are installed on wall ,direct-buried ,aerial ,pipelined .
The housing of box is made of high-grade PC plastic, the tray is
made of ABS plastic ,these material to ensure the lifetime.
We use speical rubber to seal the cover ,which not only ensure the
sealing proformance ,but also increases the oxidation resistance
,it completely reaches the repetition sealing requirements and
realized the repetition use of the products.
The installation accessories provided:sealing tape 1pc,pvc
insulation tape 1pc,splice pipe ,nylon tie 4pcs,plastic spanner
1pc,sticker,hanging hook 2pcs,wrench 1pc
Main technical Indexes:
Seal performance : the pressure in the closure is 100Kpa,put the
closure into the water for 15minutes,there is no air bubble ,and
observed it for 24 hours ,there is no change of air
pressureRe-entry performance:after 3 times of normal operations ,it
can still be up to the seal performance standard Insulation
resisitance: ≥2x104MΩWithstand voltage strength :there is no puncture and no arc-cover
after the function of 15KVDC/1min.
|Model||Dimension (MM)||G.W./N.W(kg)||Material||Inlet/Outlet||Diameter of fiber cable||Capacity||Dimension /CTN (cm)|
|QYS16||445*210*130||2.9/2.4||PC||3inlets and 3outlets||Φ16mm Φ20mm Φ23mm||Bunchy:12-144(cores) Ribbon :Max 504(cores)|