3 inlets and 3 outlets Dome Type Fiber Optic Splice Closure FTTH
Detailed product decription
Dome Type Fiber optic splice closure is suitable for single core
and ribbon fiber ,
they apply to direct-buried,aerial ,pipelined applications.
Ø Asdesign of independent innovation,spinning type sealing device
could effectively reduce the chance that sealing performance might
be affected due to human factors, and greatly improve the
credibility of sealing performance.
Ø Thesealing device of the closure adopts self-impacted hoop. The
closure will besealed perfectly while the hoop fastened.
Ø Sealingstructure: Mechanical sealing ,It has four ports ,
andcould be used for both single core and ribbon fibers; apply to
Ø The installation accessoriesprovided: sealing tape 1pc,pvc
insulation tape 1pc,splice pipe ,nylon tie4pcs,plastic spanner
1pc,sticker, pole mounting hoop 1set
Main technical Indexes:
Ø Seal performance : the pressurein the closure is 100Kpa+-5kPa,put
the closure into the water for15minutes,there is no air bubble ,and
observed it for 24 hours ,there is nochange of air pressure
Ø Re-entry performance:after 3times of normal operations ,it can
still be up to the seal performance standard
Ø Insulation resisitance: ≥2x104MΩ
Ø Withstand voltage strength :there is nopuncture and no arc-cover
after the function of 15KVDC/1min.
|Model||Dimension (MM)||G.W./N.W(kg)||Material||Inlet/Outlet||Diameter of fiber cable||Capacity of FOSC||Dimension /CTN (cm)|
|GJS98||410*200||2.2/1.34||PC||2inlets and 2outlets||Φ20mm||Bunchy:12-144(cores) Ribbon:Max 432(cores)||71*41*44.5|